Termok8 texture design finishes Matt sandblasted

Matt sandblasted is a texture that encases the surfaces of light and patinated material. Inspired by the sand dunes shaped by the wind, it alterns refined light and dark shades with delicate reliefs.
Texture design Sabbiato opaco isdirectly applicable on TermoK8^® external insulation systems (consult Specifications), reinforced skim coats and properly treated external walls.

Products used
Factor Ext.- Recommended use (two coats): 2.2 kg/m² - colours available: white, colours from the IVAS Selezione K colour chart (excluding the Reflect colours), and colours that can be produced using the You Color tinting system.
Metro Materik- Recommended use (one coat) 0.3 l/m² - colours available: white, and colours that can be produced using the You Color tinting system

Application procedure
STEP 1: Apply the 1^st skim coat of Factor Ext. with a stainless steel trowel.
STEP 2: when dry, apply a 2^nd skim coat, smoothing during drying in order to achieve an even surface.
STEP 3: apply 1 coat of Metro Materik using a brush, creating the sandblasted effect.

Equipment
Pollock Stainless Steel Trowel, Klimt Glazing Brush.

Products

Other Texture design

1 Adhesive (options) Klebocem Klebocem Minerale
2 Insulation panel (options) Converto 30-G Converto 31-G Plus Converto fonostop Converto hp Converto 35-100 Converto 31 bw Eps 35 max r Eps 31 g max r Lane di Roccia Lana di Vetro K 34
3 Skim coat (options) Klebocem Klebocem Minerale
4 Reinforcing mesh (options) Armatex C1 Armatex C1 M Armatex C1 R
5 Finishes (options) Corten Cemento dilavato Cemento spazzolato Legno Travertino Striato Schiacciato Sabbiato opaco Sabbiato glitterato

Products

Other Texture design

b2b